Live screen printing in Portland is what it sounds like: screens, ink and a printer pulling each shirt by hand on your floor while people watch. It's the oldest kind of live t-shirt printing, and the station guests crowd closest to. Use it when one design in one to three colors is going on a lot of shirts, like the giveaway at an Oregon Convention Center booth, a festival crew shirt or a match-day design near Providence Park. An expo footprint can take a two-press line; an Alberta storefront has room for one.
Everything comes up from Fullerton on the freight truck: presses, flash dryers, ink, blanks, tables and the printers to run them. We set it up wherever the event is, a Pearl District ballroom or a Hawthorne pop-up. Our standard build is two presses with two printers, good for 100+ shirts per hour once the line is steady, which is what a busy booth needs.
Why a press for a Portland event
- Volume: roughly 60 shirts an hour from each press after the first few minutes.
- Craft you can watch: in a city that likes seeing how things are made, the pull is the draw.
- A print that lasts: solid ink on a heavyweight tee or a hoodie holds up wash after wash.
- Art locked early: the screens get made in our shop before the truck leaves, so final art is due about a week ahead.
One Portland note: ink cures more slowly in cold, damp air, so an outdoor press needs more room under cover than a DTF station does. Want full-color art or names in the same footprint? Add a live DTF station beside the press.
What a press station needs: roughly 10×10 ft and two 120V/20A circuits of its own. For an Oregon Convention Center booth, that power is ordered from the venue ahead of the show.